Choose your extender model or the part of the connection you want to examine. This library covers Amped devices alongside practical networking hardware and coverage checks. Keep the upstream router link, the extender link and the client connection separate when diagnosing a failure.
Choose a guide
- Amped REC10 cannot find your home Wi-Fi: a scan checklist
Check the upstream signal and network identity before repeating the REC10 setup wizard or changing unrelated router settings.
- Reconnect an Amped SR10000 after changing the router Wi-Fi name or password
Update the SR10000 upstream connection, then check the extended network separately so saved credentials do not obscure the result.
- Amped RE2600M placement: test the router link before moving into a dead zone
Use the RE2600M signal indicator and a repeatable room-by-room test to find a position that still receives a usable upstream signal.
- Cat5e or Cat6 for a home network: check the link before replacing cables
Compare the ports, cable condition and negotiated link before assuming that a higher category cable will fix a slow connection.
Existing setup resources
Before you change a setting
Note the model, hardware revision, operating mode and exact symptom. Keep a record of the current configuration so a change has a clear purpose and a way back. Never share passwords or unredacted device labels in public comments.
How to use this library
Open the guide that matches your device or task, read its scope note, and use the official sources for downloads and revision-specific instructions. These are independent editorial guides, not manufacturer support or a router login portal.