Independent extender & router guidesHelping you find your connection.
Amped Wireless GuidesThe help centre Search
The guide library

Category: PoE power planning

PoE power planning

Calculate a PoE switch budget before adding access points and cameras

Check both the per-port capability and the total available budget, using documented device requirements.

Read guide
PoE power planning

Passive PoE vs 802.3af/at: do not choose an injector by voltage alone

Match the powered device’s documented standard and electrical requirements before connecting an injector.

Read guide
PoE power planning

PoE injector vs PoE switch for adding an access point

Compare device count, management needs and the existing switch before replacing more hardware than necessary.

Read guide
300 FAQs across our guide libraries

Quick answers

100 practical questions from Amped Wireless Guides.

Browse all 100 FAQs
Why do RJ45 SFP+ modules need thermal planning?

An RJ45 SFP+ module can connect copper Ethernet equipment to a compatible switch cage, but it adds its own power and thermal requirements. Filling adjacent cages without checking the vendor's guidance can create an avoidable reliability problem. MikroTik's S+RJ10 guidance discusses spacing these modules and providing suitable cooling. Its recommendations are specific to that product and device arrangement. Do not assume another manufacturer's module has identical behavior or limits.

Read the full guide and sources
Why does copper-clad aluminum cable matter for PoE?

When purchasing Ethernet cable, look for the conductor material as well as the category label. Copper-clad aluminum, commonly abbreviated CCA, is not the same construction as a suitable copper conductor. Fluke Networks highlights resistance and compliance concerns with CCA cabling. PoE carries electrical power along the data cable. Resistance and balance affect that path as well as ordinary data performance. An installation that appears to pass light traffic does not thereby prove suitable behavior under the intended powered-device load.

Read the full guide and sources
Can electrical appliances affect a powerline connection?

A powerline connection may vary when nearby electrical equipment changes operating state. If a call breaks up whenever a particular appliance runs, record that relationship before changing the router or blaming the broadband service. Compare a transfer between devices on your own network with an internet test. If only traffic through the powerline segment deteriorates, the evidence points closer to that segment. If a directly connected router client also fails, broaden the investigation.

Read the full guide and sources
When does Deco PX50’s integrated powerline backhaul help?

Deco PX50 is worth investigating when thick walls make wireless backhaul difficult and Ethernet cannot conveniently reach the next node. Its integrated powerline capability is the main distinction to evaluate against an ordinary X50 deployment, rather than assuming a similar model name means identical connection options. TP-Link's current PLC FAQ says the main Deco must support powerline backhaul. It also specifies compatible powerline families. Plan the main unit and satellites together; adding a single PX50 to an arbitrary existing layout is not sufficient proof that PLC backhaul will operate.

Read the full guide and sources
Independent. Practical. Clear.

Amped Wireless Guides is an independent information website. We are not affiliated with or endorsed by Amped Wireless. Product names belong to their respective owners.