Independent extender & router guidesHelping you find your connection.
Amped Wireless GuidesThe help centre Search
The guide library

All guides

Powerline networking

Ethernet, MoCA or powerline: choose backhaul from the wiring you can actually use

Compare installation feasibility, service compatibility and stability before ranking adapters by headline speed.

Read guide
Powerline networking

PGW2440 vs TL-WPA8631P: compare both the wireless and powerline halves

A newer Wi-Fi radio does not remove the need for matching powerline endpoints and suitable electrical wiring.

Read guide
Powerline networking

Moving from devolo dLAN to Magic: replace a working link as a pair

Plan the migration room by room because dLAN and Magic cannot form one shared powerline network.

Read guide
Powerline networking

Deco PX50 vs X50: when integrated powerline backhaul matters

PX50 adds a powerline path, but compatibility and the main Deco model must fit the documented design.

Read guide
Powerline networking

TP-Link PG2400P vs TL-PA9020P: choose the powerline family first

These wired kits use different powerline standards; compare expansion plans and actual outlet performance.

Read guide
Powerline networking

A powerline adapter blinks after the computer sleeps: check power-saving behavior

An idle-state indicator can be normal; compare wake-up recovery with a real loss of powerline connectivity.

Read guide
Powerline networking

Wi-Fi Clone on a powerline extender does not create the powerline link

Treat wireless names, powerline pairing and mesh compatibility as three separate setup checks.

Read guide
Powerline networking

Powerline speed drops when an appliance runs: record the pattern

Use timing and safe outlet comparisons to distinguish electrical interference from an internet-provider slowdown.

Read guide
Powerline networking

Why a powerline adapter belongs in a suitable wall outlet

Surge strips and extension arrangements can change the signal path; test direct placement before judging the kit.

Read guide
Powerline networking

G.hn vs HomePlug AV2: check compatibility before adding a powerline adapter

A shared wall outlet technology does not mean two adapters can join the same powerline network.

Read guide
300 FAQs across our guide libraries

Quick answers

100 practical questions from Amped Wireless Guides.

Browse all 100 FAQs
Why does a phone stay connected to a distant router?

A phone may remain connected to the main router after you walk beside an extender using the same Wi-Fi name. The client decides when to seek another access point, and matching network names alone do not create a coordinated mesh system. Use the router or extender's client list where available to identify which device is serving the phone. Update or refresh the view before drawing a conclusion. A remembered list entry can remain visible after the client has moved.

Read the full guide and sources
Is seeing the far building enough to plan a wireless bridge?

A clear view between two wireless bridge endpoints is a useful starting point, but it is not a complete path assessment. Radio propagation also depends on clearance around the direct line, commonly considered through the Fresnel zone. Ubiquiti's wireless training guidance explains line of sight and Fresnel clearance. For a property owner, the important point is that a tiny visible gap between branches may still be unsuitable for a reliable link.

Read the full guide and sources
Why might a PoE watchdog repeatedly restart a working access point?

Some PoE switches can restart a powered device when a health check fails. This can recover a genuinely unresponsive access point, but an incorrect target or unsuitable check can also cause repeated unnecessary power cycles. Inspect its supported logs and PoE status. Compare the restart times with the configured monitoring interval. NETGEAR describes self-healing that stops and restores port power after a device fails to respond under the configured conditions.

Read the full guide and sources
How do I calculate a PoE switch’s required power budget?

A PoE switch has two important power limits: what an individual port can supply and what all active ports can supply together. Counting free sockets alone is not enough when adding access points, cameras or phones. For each powered device, record its required PoE standard, documented maximum or allocated power requirement and intended switch port. Use the exact model's datasheet. A typical consumption figure may exclude features such as a camera's heater or infrared illumination.

Read the full guide and sources
Independent. Practical. Clear.

Amped Wireless Guides is an independent information website. We are not affiliated with or endorsed by Amped Wireless. Product names belong to their respective owners.