Independent extender & router guidesHelping you find your connection.
Amped Wireless GuidesThe help centre Search
The guide library

All guides

Power and resilience

PoE port priority: keep essential devices identified before a power-budget shortage

Priority determines which supported ports retain power under particular conditions; it does not increase the available budget.

Read guide
Power and resilience

Choosing a UPS for a router and ONT: protect the whole connection path

Add every necessary device to the load and use the manufacturer’s runtime curve instead of dividing VA by watts.

Read guide
Outdoor coverage and bridges

Outdoor wireless bridge disconnects: check DFS events before forcing a channel

Radar-related channel changes can be legitimate; use device logs and locally permitted settings.

Read guide
Outdoor coverage and bridges

The building bridge connects, but the workshop has no Wi-Fi: check local distribution

A working point-to-point link may still need an access point inside the remote building.

Read guide
Outdoor coverage and bridges

Wireless bridge planning: seeing the other building is not the whole path check

Account for clearance around the direct line, seasonal foliage and stable mounting positions.

Read guide
Outdoor coverage and bridges

Garden access point or building bridge: choose the device for the job

Serving phones in a garden and linking two buildings are different wireless tasks.

Read guide
Outdoor coverage and bridges

Outdoor Wi-Fi installation: the cable entry matters as much as the enclosure

Use the complete manufacturer-approved mounting, sealing and power arrangement for outdoor equipment.

Read guide
Access-point installation

Full Wi-Fi bars in a busy room: coverage is not the same as capacity

Plan for simultaneous application demand, not just whether a signal reaches every seat.

Read guide
Access-point installation

Keep the Wi-Fi radio out of a metal network cabinet where possible

A cabinet can be convenient for wired equipment while being a poor place for the access point serving the rooms.

Read guide
Access-point installation

Can a ceiling access point go on a wall? Check the mounting guide and coverage

Mechanical mounting support and useful radio coverage are separate checks.

Read guide
300 FAQs across our guide libraries

Quick answers

100 practical questions from Amped Wireless Guides.

Browse all 100 FAQs
Why can an extender fail to see the router’s 5 GHz network?

An extender finding the router's 2.4 GHz network but missing its 5 GHz network has a narrower problem than a completely failed setup. Confirm the router's 5 GHz radio and the extender's supported channels before resetting the device. Use another compatible client near the router to check its 5 GHz network. If that client cannot see it either, inspect the router first. When both bands share one name, use the router's status information to verify which band the test client actually joined.

Read the full guide and sources
Does plugging a television into an extender create wired backhaul?

Connecting a television or console to an extender's Ethernet port can be useful, especially when the device's own wireless adapter is weak. However, if the extender connects to the router over Wi-Fi, the stream still depends on that wireless backhaul. Write the sequence as television, cable, extender, wireless link, router and internet. TP-Link describes this Ethernet bridge function on supported extenders. The cable changes the client-facing segment; it does not replace the radio connection between the extender and router.

Read the full guide and sources
Do both RE405BE and RE655BE include a 6 GHz radio?

Two extenders can both support Wi-Fi 7 while serving different frequency bands. TP-Link's US RE405BE is a dual-band model, whereas the RE655BE is tri-band with 6 GHz. That is a more useful starting point than comparing the Wi-Fi 7 badge alone. Inventory the laptops and phones that need improved service. Confirm their actual wireless hardware and operating-system support. An older device using 2.4 or 5 GHz does not move to 6 GHz merely because the extender offers it.

Read the full guide and sources
How should backhaul affect an XD5 versus XT9 decision?

ASUS positions the ZenWiFi XD5 as a dual-band AX3000 system and the XT9 as a tri-band AX7800 system. The additional radio arrangement makes the backhaul plan central to a useful comparison. Examine how the proposed system allocates its radios between clients and node communication. A tri-band design offers options that a dual-band design does not, but real results still depend on node placement, interference and the building. Do not convert the combined wireless class directly into an expected client download speed.

Read the full guide and sources
Independent. Practical. Clear.

Amped Wireless Guides is an independent information website. We are not affiliated with or endorsed by Amped Wireless. Product names belong to their respective owners.